3DR X7 Radio Telemetry 1000mW 433MHz 5KM for FPV Drone & Quadcopter

Description

The 3DR X7 1000mW 433MHz Radio Telemetry Module is a long-range wireless communication system designed for real-time telemetry and data transmission between UAVs, FPV drones, robots, and ground control stations.

Operating at 433MHz with up to 1000mW (1W) transmission power, the X7 provides stable communication over distances of up to 5KM in open, unobstructed environments. The bidirectional communication system can be used for flight data monitoring, parameter configuration, GPS information, and mission control.

Both telemetry modules are interchangeable, allowing either unit to be used as the aircraft or ground-side module. The built-in bind button simplifies pairing, while the GH1.25 self-locking connector provides a secure connection during operation.

Features

• 433MHz long-range telemetry communication
• High transmission power up to 1000mW (1W)
• Communication range up to 5KM in open conditions
• Bidirectional serial data transmission
• MAVLink compatible
• UART / TTL interface
• Compatible with Pixhawk and APM flight controllers
• Supports ArduPilot and Mission Planner
• Interchangeable air and ground modules
• Built-in bind button for easy pairing
• GH1.25 self-locking interface
• External antenna for improved communication
• USB-to-serial connection for ground station use
• Suitable for FPV, UAV, robotics, and autonomous systems

Specification

• Model: 3DR X7
• Frequency: 433MHz
• Maximum Transmission Power: 1000mW (1W / 30dBm)
• Communication Distance: Up to 5KM, outdoor and unobstructed
• Communication Type: Bidirectional serial telemetry
• Default Baud Rate: 57600
• Air Data Rate: Adjustable
• Interface: UART / TTL
• Protocol: MAVLink compatible
• Operating Voltage: 3.7–6V DC
• Transmit Current: 100mA at 30dBm
• Receive Current: 25mA
• Antenna: External antenna
• Operating Temperature: -10°C to 60°C
• Operating Humidity: 10–90% RH, non-condensing
• Module Dimensions: 49 × 25 × 13mm, excluding antenna
• Weight: 22.5g per module including antenna

Compatibility

• Pixhawk flight controllers
• APM flight controllers
• ArduPilot
• Mission Planner
• FPV drones and quadcopters
• UAV and autonomous vehicle systems
• Robotics and telemetry projects

Binding Procedure

1. Power on one telemetry module; the green indicator will flash.
2. Press and hold the Bind button for approximately 3 seconds until the red indicator flashes rapidly.
3. Within 10 seconds, power on the second telemetry module.
4. A steady green indicator indicates successful pairing.

Package Includes

• 2 × 3DR X7 433MHz Telemetry Radio Modules
• 2 × Antennas